ʻO kāu alakaʻi i ka hoʻomaopopo ʻana i nā ʻano lāʻau ʻike ʻokoʻa!

hoʻolauna

Pehea wau e koho ai i ka ʻili ʻili kūpono?

Ke koho ʻana i ka ʻoki ʻoki kūpono no kāu papahana, nui nā kumu e noʻonoʻo ai. Pono ʻoe e noʻonoʻo e pili ana i ka mea āu e manaʻo ai e ʻoki a me ke ʻano o nā ʻoki āu e makemake ai e hoʻohui i ka mīkini āu i manaʻo ai e hoʻohana.
ʻO kaʻoiaʻiʻo, hiki i nā mea hana lāʻau akamai ke ʻike i nā ʻano paʻakikī e huikau.
No laila, ua hana mākou i kēia alakaʻi no ʻoe wale nō.

E like me Koocut Tools, Ma kēia alakaʻi, e wehewehe mākou i nā ʻano ʻano like ʻole o nā lau a me kā lākou mau noi a me kekahi mau huaʻōlelo a me nā kumu e noʻonoʻo ai i ke koho ʻana i kahi pahi.

Papa helu

• Ka hoʻokaʻawale ʻana o nā lau ʻili

• 1.1 E like me ka helu o nā niho a me ka helehelena

• 1.2 Hoʻokaʻawale ʻia e ka ʻoki ʻana i nā mea

• 1.3 Hoʻokaʻawale ma ka hoʻohana ʻana

• ʻO nā ala maʻamau e hoʻohana ai i nā lau ʻike

• ʻO ke kuleana o ka hiʻohiʻona kūikawā kūikawā

Ka hoʻokaʻawale ʻana o nā lau ʻili

1.1 E like me ka helu o nā niho a me ka helehelena

Hoʻokaʻawale ʻia nā lau ʻike i ke ʻano Iapana a me ke ʻano ʻEulopa e pili ana i ka nui o nā niho a me ke ʻano.

ʻO ka nui o nā niho o nā lau ʻike Iapana he 10 ka nui, a ʻo ka helu o nā niho he 60T, 80T, 100T, 120T (ka mea maʻamau ka pololei o ka lāʻau paʻa a me ke alumini alumini, e like me 255*100T a i ʻole 305x120T);

He 12 ka nui o na niho o na pahi ike kaila o Europa, a o ka helu o na niho he 12T, 24T, 36T, 48T, 60T, 72T, 96T (maa mau i ka laau paa hookahi maka pahi, multi-blade saws, scribing saws, panel general-purpose saws.24T, 12012T+12T, 30036T, 30048T, 60T, 72T, 350*96T, a pela aku).

Papa Hoʻohālikelike o ka helu o nā niho

Māhele ʻia nā ʻili i nā mea hoʻohana: nā ʻili maʻamau, nā ʻili makaʻala, nā ʻili uila, nā ʻili aluminika, nā ʻili hoʻokahi, nā ʻili multi-lau, nā ʻili mīkini ʻoki ʻoki, etc. (nā mīkini hoʻohana ʻokoʻa)

1.2 Hoʻokaʻawale ʻia e ka ʻoki ʻana i nā mea

Ma ke ʻano o ka hana ʻana i nā mea hana, hiki ke hoʻokaʻawale ʻia nā lau ʻike i: nā ʻili panel, nā ʻili lāʻau paʻa, nā papa multi-layer, plywood, alumini alloy saws, plexiglass saws, diamond saws, a me nā mea hao kūikawā ʻē aʻe. Hoʻohana ʻia lākou i nā kula ʻē aʻe e like me: ka ʻoki pepa, ka ʻoki ʻana i ka meaʻai etc.

Saws Panel

He aha nā mea i hoʻohana ʻia no ka ʻili panel: e like me MDF a me ka particleboard. Ua māhele ʻia ʻo MDF, i kapa ʻia ʻo density board, i ka papa haʻahaʻa haʻahaʻa a me ka papa kiʻekiʻe.

ʻIke uila: BT, T (ʻano niho)

ʻIke papa ʻaʻa: BT, BC, T

ʻIke hoʻokahi a me ka ʻelua kākau ʻōlelo: CT, P, BC

ʻIke Slotting: Ba3, 5, P, BT

Ua ʻike ʻia ka mīkini ʻili ʻili iā BC, R, L

Paa Laau Paa

ʻO ka ʻeli lāʻau paʻa ka hana nui i ka lāʻau paʻa, lāʻau paʻa maloʻo a me ka lāʻau paʻa pulu. ʻO nā mea hoʻohana nui

ʻOki ʻana (kaʻiliʻili) BC, liʻiliʻi nā niho, e like me 36T, 40T

Hoʻopau (hoʻopaʻa) BA5, ʻoi aku nā niho, e like me 100T, 120T

ʻO ka ʻoki ʻana iā BC a i ʻole BA3, e like me 48T, 60T, 70T

Hoʻokomo i ka Ba3, Ba5, e laʻa me 30T, 40T

Ua ʻike ʻo Multi-blade iā Camelback BC, liʻiliʻi nā niho, e laʻa me 28T, 30T

ʻIke ʻia ʻo BC, hoʻohana nui ʻia no ka lāʻau paʻa nui ma luna o ka ʻōpala i hoʻopaʻa ʻia, maʻamau 455 * 138T, 500 * 144T

Plywood Saw Blade

Hoʻohana nui ʻia nā ʻili ʻili no ka hana ʻana i ka lāʻau ʻōpala a me nā papa multi-layer i nā ʻili papaʻaina hoʻoheheʻe a me nā ʻili wili pālua.
ʻIke ʻia ka papa ʻaina: BA5 a i ʻole BT, hoʻohana nui ʻia i nā hale hana hale, nā kikoʻī e like me 305 100T 3.0 × 30 a i ʻole 300x96Tx3.2 × 30
ʻImi wili lua-hope: BC a i ʻole 3 hema a me 1 ʻākau, 3 ʻākau a me 1 hema. Hoʻohana nui ʻia i nā hale hana pā e hoʻopololei i nā ʻaoʻao o nā papa nui a hoʻoponopono i nā papa hoʻokahi. ʻO nā kikoʻī e like me 300x96T*3.0

1.3 Hoʻokaʻawale ma ka hoʻohana ʻana

Hiki ke hoʻokaʻawale hou ʻia nā lau ʻike ma ke ʻano o ka hoʻohana ʻana: ʻoki, ʻoki, scribing, grooving, ʻoki maikaʻi, ʻokiʻoki.

ʻO nā ala maʻamau e hoʻohana ai i nā lau ʻike

Ka hoʻohana ʻana i ka ʻike maka pālua

Hoʻohana ka ʻike maka ʻelua i nā spacers e hoʻoponopono i ka laulā kākau e hoʻokō i kahi kūpono kūpono me ka ʻike nui. Hoʻohana nui ʻia ia ma nā saws papaʻaina.

Pōmaikaʻi: ka hoʻololi ʻana o ka pā, maʻalahi e hoʻoponopono

Nā hemahema: ʻAʻole ikaika e like me ka hahau hoʻokahi

Ka hoʻohana ʻana i ka ʻike maka hoʻokahi

Hoʻoponopono ʻia ka laulā o ka ʻike maka hoʻokahi ma ka hoʻokiʻekiʻe ʻana i ke axis o ka mīkini e hoʻokō i kahi kūpono paʻa me ka ʻike nui.

Pōmaikaʻi: kūpaʻa maikaʻi

Nā hemahema: Nā koi kiʻekiʻe ma nā papa a me nā mea mīkini

ʻO nā lako i hoʻohana ʻia no nā ʻili maka ʻelua a me nā pahi helu hoʻokahi

ʻO nā ʻōlelo kikoʻī maʻamau o nā ʻili maka pālua:

120（100）24Tx2.8-3.6*20（22）

ʻO nā kikoʻī maʻamau o nā ʻili ʻo Singel Scoring:

120x24Tx3.0-4.0×20（22） 125x24Tx3.3-4.3×22

160（180/200）x40T*3.0-4.0/3.3-4.3/4.3-5.3

Ka hoʻohana ʻana i ka saw grooving

Hoʻohana nui ʻia ka grooving saw e ʻoki i ka laula a me ka hohonu o ka groove i koi ʻia e ka mea kūʻai aku ma ka pā a i ʻole ke alumini alumini. Hiki ke hana ʻia nā ʻōpala i hana ʻia e ka hui ma luna o nā mea hoʻokele, nā ʻili lima, nā wili spindle vertical, a me nā ʻili papaʻaina.

Hiki iā ʻoe ke koho i kahi saw grooving kūpono e like me ka mīkini āu e hoʻohana nei, inā ʻaʻole ʻoe i ʻike ʻo wai ia. Hiki iā ʻoe ke hoʻokaʻaʻike mai iā mākou a e kōkua mākou iā ʻoe e hoʻoponopono i ka pilikia.

Ka hoʻohana ʻana i ka pahi ʻike honua

Hoʻohana nui ʻia nā saws Universal no ka ʻoki a ʻoki ʻana i nā ʻano papa like ʻole (e like me MDF, particleboard, lāʻau paʻa, etc.). Hoʻohana mau ʻia lākou ma nā ʻuala papaʻaina hoʻoheheʻe pololei a i ʻole nā ​​saws reciprocating.

Ka hoʻohana ʻana i ka pahi ʻoki uila

Hoʻohana nui ʻia ka pahi ʻoki ʻoki uila i nā hale hana hale papa no ka hoʻopaʻa ʻana i nā panela (e like me MDF, particleboard, etc.) a me nā panela ʻoki. E mālama i ka hana a hoʻomaikaʻi i ka pono hana. ʻO ka maʻamau, ʻoi aku ke anawaena o waho ma luna o 350 a ʻoi aku ka mānoanoa niho ma luna o 4.0. (ʻO ke kumu he mānoanoa ka mea hana)

Hoʻohana i nā ʻili alumini

Hoʻohana ʻia nā ʻoki ʻoki alumini no ka hana ʻana a me ka ʻoki ʻana i nā profile aluminika a i ʻole alumini paʻa, alumini hollow a me kāna mau metala non-ferrous.
Hoʻohana maʻamau ia ma nā mea ʻoki alumini alumini kūikawā a me nā ʻili kaomi lima.

E hoʻohana i nā ʻili maka ʻē aʻe (e laʻa, nā pahi plexiglas, nā pahi ʻili, a pēlā aku)

ʻO Plexiglass, i kapa ʻia ʻo acrylic, he ʻano niho ʻike like me ka lāʻau paʻa, maʻamau me ka mānoanoa niho o 2.0 a i ʻole 2.2.
Hoʻohana nui ʻia ka ʻili kuʻi me ka pahi ʻohi e wāwahi i ka wahie.

ʻO ke kuleana o ka hiʻohiʻona kūikawā kūikawā

Ma waho aʻe o nā hiʻohiʻona ʻike maka maʻamau, pono mākou i nā huahana maʻamau ʻole.（OEM a i ʻole ODM)

E waiho i kāu mau koi ponoʻī no ka ʻoki ʻana i nā mea, ka hoʻolālā hiʻohiʻona, a me nā hopena.

He aha ke ʻano o ka pahi ʻike maʻamau ʻole i kūpono loa?

Pono mākou e hōʻoia i kēia mau mea

1. E hōʻoia e hoʻohana i ka mīkini
2. E hōʻoia i ke kumu
3. E hōʻoia i ka mea hana
4. E hōʻoia i nā kikoʻī a me ke ʻano niho

E ʻike i nā ʻāpana i luna aʻe, a laila e kūkākūkā i kāu mau pono me kahi mea kūʻai aku ʻike maka e like me Koocut.

Hāʻawi ka mea kūʻai aku iā ʻoe i nā ʻōlelo aʻo ʻoihana, kōkua iā ʻoe e koho i nā huahana maʻamau, a hāʻawi iā ʻoe i nā hoʻolālā kiʻi kiʻi ʻoihana.

A laila, ʻo nā hiʻohiʻona hiʻohiʻona kūikawā a mākou e ʻike pinepine ai ma nā lau ʻike he ʻāpana o ka maʻamau ʻole

Ma lalo mākou e hoʻolauna i kā lākou mau hana pili

ʻO ka mea maʻamau, ʻo ka mea a mākou e ʻike ai ma ke ʻano o ka ʻili ʻili he mau kui keleawe, nā makau iʻa, nā hono hoʻonui, nā uwea silencer, nā puka kūikawā, nā ʻōpala, etc.

Nā kui keleawe: Hana ʻia me ke keleawe, hiki iā lākou ke hōʻoia mua i ka hemo ʻana o ka wela. Hiki iā ia ke pāʻani i kahi hana damping a hōʻemi i ka haʻalulu o ka maka i ka wā e hoʻohana ai.

Uea hāmau: E like me ka inoa i hōʻike ʻia, ʻo ia kahi āpau i wehe kūikawā ʻia ma ka ʻili ʻili e noho mālie a hōʻemi i ka walaʻau.

Mea ʻokiʻoki: He mea maʻalahi no ka wehe ʻana i nā puʻupuʻu, ʻike pinepine ʻia ma nā ʻili ʻili i hoʻohana ʻia e ʻoki i nā mea lāʻau paʻa.

ʻO ka hapa nui o nā hoʻolālā kūikawā i koe e lawelawe pū i ke kumu o ka hoʻopaʻa ʻana a i ʻole ka hoʻopau ʻana i ka wela. ʻO ka pahuhopu nui ka hoʻomaikaʻi ʻana i ka maikaʻi o ka hoʻohana ʻana i ka pahi ʻike.

Hoʻopili ʻia: Inā kūʻai ʻoe i ka nui o nā lau ʻike, hiki i ka hapa nui o nā mea hana ke ʻae i ka hoʻopili ʻana a me ka hōʻailona ʻana.

Inā makemake ʻoe, hiki iā mākou ke hāʻawi iā ʻoe i nā mea hana maikaʻi loa.

Mākaukau mau mākou e hāʻawi iā ʻoe i nā mea hana ʻoki kūpono.

Ma ke ʻano he mea hoʻolako i nā ʻili circular saw, hāʻawi mākou i nā waiwai premium, ʻōlelo aʻoaʻo huahana, lawelawe ʻoihana, a me ke kumu kūʻai maikaʻi a me ke kākoʻo kūʻai kūʻokoʻa!

Ma https://www.koocut.com/.

E uhai i ka palena a neʻe i mua me ka wiwo ʻole! ʻO kā mākou slogan.