Ukukhangela kwangaphambili

Imveliso ekhoyo

I-HERO V6 yabona i-Blade ye-Industrial Saw Blade yeZixhobo zokuSebenza ngamaplanga

Qhagamshelana nathi Funda nzulu
Imveliso ekhoyo

PCD Saw Blade Kuba Panel Ubungakanani Saw Blade

Qhagamshelana nathi Funda nzulu
Imveliso ekhoyo

Cold Saw Blade for Metal Ferrous

Qhagamshelana nathi Funda nzulu
Imveliso ekhoyo

TCT Dowel Drill Bits Brad-Point Drill Bits

Qhagamshelana nathi Funda nzulu
Imveliso ekhoyo

HERO TCT Router Amasuntswana aNgqo

Qhagamshelana nathi Funda nzulu
Imveliso ekhoyo

PCD Fine Ukucheba Cutter For Edge Banding Machine Wood Edging

Qhagamshelana nathi Funda nzulu
Imveliso ekhoyo

Ezinye izixhobo

Qhagamshelana nathi Funda nzulu

Umatshini Wokusika owomileyo we-CRD1 oFakelwe umfanekiso

Umtshini we-Dry Cut Saw CRD1

Inkcazelo emfutshane:

Umatshini wokusika owomileyo we-CRD1 owenziwe ngemoto yobhedu esulungekileyo, kunye nesantya esisisigxina kunye ne-1300RPM. Faka isicelo sokusikwa kwentsimbi yentsimbi, umbhobho wensimbi i-U-steel kunye nezinye izinto ze-ferrous.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Intshayelelo yeMveliso

Iimbonakalo

1. Inkqubo ecocekileyo yokusika i-Eco-friendly - Uthuli oluphantsi ekusikeni.
2. Ukusika okukhuselekileyo - Ukuphepha ngokufanelekileyo ukuqhekeka kunye nokutshiza ekusebenzeni.
3. Ukusika ngokukhawuleza - i-4.3s ukunqumla i-32mm yentsimbi ephosakeleyo.
4. Umphezulu ogudileyo: Indawo yokusika i-Flat enedatha echanekileyo yokusika.
5. Ixabiso elisebenzayo: Ukuzinza okuphezulu kunye neendleko zokunciphisa iiyunithi ezikhuphisanayo.

Iiparamitha

Umzekelo	CRD1-255	CRD1-355
Amandla	2600w	2600w
Max.Saw Blade Diameter	255mm	355mm
RPM	1300R/MIN	1300R/MIN
Bore	25.4mm
I-Voltage	220V/50HZ

FAQ

1. Umbuzo: Ngaba i-HEROTOOLS umenzi?
A: I-HEROTOOLS ngumenzi kwaye yasekwa ngo-1999, sinabahambisi abangaphezu kwe-200 emhlabeni wonke kwaye uninzi lwabathengi bethu abavela kuMntla Melika, eJamani, eGrace, eMzantsi Afrika, eMzantsi-mpuma Asia naseMpuma ye-Asia njl.

2. Q: Liliphi ixesha lokuhambisa?
A: Ngokuqhelekileyo sinomatshini kunye ne-blade yabona kwisitokhwe, sifuna kuphela iintsuku ezi-3-5 zokulungisa iphakheji, ukuba asinaso isitokhwe, sifuna iintsuku ezingama-20 ukuvelisa umatshini kunye ne-saw blade.

3. Umbuzo: Uthini umahluko phakathi kwe-CRD1 kunye ne-ARD1?
A: I-CRD1 yi-frequency esisigxina kunye ne-1300RPM, kwaye i-ARD1 yinguquko rhoqo kunye ne-700-1300RPM, ukuba usike izinto ezishinyeneyo, ungakhetha i-ARD1, kuba isantya sokusika yi-700-1300RPM, kwaye ufuna i-700RPM ukusika izinto ezinde. kunye ne-saw.

4. Q: Unokukhetha njani umatshini wokuguqula amaza kunye nomatshini osisigxina?
A: Ukuguqulwa kwamaxesha kuthetha ukuba isantya sinokulungelelaniswa, isantya somatshini wethu wokuguqula amaza sisuka kwi-700RPM ukuya kwi-1300RPM, ungakhetha isantya esifanelekileyo ukusika izinto ezahlukeneyo.
Isantya esilungisiweyo sithetha ukuba isantya simisiwe, isantya esisisigxina somatshini yi-1300RPM.

Okwenyani umatshini oqhelekileyo omiselweyo (1300RPM) wanele kubathengi abaninzi (80%), kodwa abanye abathengi bafuna ukusika izinto ezinkulu kakhulu, ezinje nge-50mm yentsimbi engqukuva, efana nentsimbi yentsimbi ye-I-BEAM kunye ne-U-shape steel, ngoko ke kule meko, umthengi kufuneka akhethe umatshini wokuguqula amaza, kwaye ahlengahlengise isantya ukuya kwi-700RPM okanye i-90RPM.