I-PCD German Technology High Quality Circular Saw Blade yokunika amanqaku

Inkcazo emfutshane:

Iiblade zokusarha zokusika iiphaneli zomthi, ii-particle, i-laminated kunye ne-MDF kwiisarha zetafile kunye neesarha zokulinganisa iiphaneli. Zihlala zisetyenziswa kunye neblade ephambili yesarha.
Iinkcukacha zobugcisa:
Ububanzi: 120mm (4.7″)
I-Arbor: 20mm
Ukugaya: ikhonikhi
I-Angle yeHook: 12°
I-Kerf: 2.8-3.6/3.0-4.0
Ipleyiti: 2.2
Amazinyo: 24T
Isaphulelo sobungakanani:Kukho isaphulelo sekharteni ukuba ubungakanani bungaphezulu kweziqwenga ezili-10 neziqwenga ezingama-20

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Isishwankathelo seMveliso

Iimpahla ezingekasilwa:Icandelo le-PCD, ipleyiti yentsimbi engeniswe eJamani engu-75CR1 kunye nepleyiti yentsimbi engeniswe eJapan engu-SKS51.

Uphawu:IQHAWE, LILT

Iimbonakalo

1. Isetyenziselwa ukusika iiphaneli zomthi, kunye nezinye iiblade zesarha zokusika i-aluminiyam kunye nesamente yefayibha.
2. Isetyenziswa kwizixhobo ezifana neBiesse, iHomag, ii-sliding saws, kunye nee-portable saws.
3. Ugqubuthelo olungaphezulu lwe-chrome.
4. Icandelo le-PCD libonelela ngobomi bezixhobo obude kunye nobude beblade, liphucula ubomi bokusika kunye nokugqitywa kwezinto ezahlukeneyo.
5. Uyilo oluchasene nokungcangcazela lunciphisa ukungcangcazela kwaye lukhuthaza ukusebenza okuphezulu.
6. Ubude obuqhelekileyo bezinyo le-PCD yi-6.0mm, nangona kunjalo, linokulungiswa ukuze lihlangabezane neemfuno ezikhethekileyo, ezinje nge-6.8mm kunye ne-7mm.

Iiparameters

1. Iiblade zesarha zeephaneli-ngesiqhelo ububanzi ukusuka kwi-100mm ukuya kwi-200mm, inani lamazinyo ukusuka kwi-24 ukuya kwi-40T, ubukhulu be-kerf buhlala buyi-2.8-3.6, 3.0-4.0, 4.3-4.3, 4.7-5.7mm
2. Iiblade zokusika i-aluminium, ngokuqhelekileyo ububanzi ukusuka kwi-305mm ukuya kwi-550mm, amazinyo anenombolo ye-100T, 120T, 144T.
3. Iiblade zokusarha zesamente yefayibha, ezidla ngokuba namazinyo ambalwa.
4. Apha ngezantsi kukho ezinye zeendlela eziqhelekileyo zokulinganisa iibhleyidi zesarha ezinobukhulu bepaneli kunye nokuhanjiswa ngokukhawuleza.
Iinkcukacha ezinganikwanga zifuna iintsuku ezimbalwa ezongezelelweyo zemveliso.

OD(mm)	Ibhore	Ubukhulu beKerf	Ubukhulu bepleyiti	Inani lamazinyo	Gaya
120	20	2.8-3.6	2.2	12+12	ikhonikhi
120	22	2.8-3.6	2.2	12+12	ikhonikhi
120	22	2.8-3.6	2.2	12+12	U
120	20	3.0-4.0	2.2	24	ikhonikhi
120	22	3.0-4.0	2.2	24	ikhonikhi

160	30	3.3-4.3	2.2	36	ikhonikhi
160	30	4.3-5.3	3.2	36	ikhonikhi
160	45	4.3-5.3	3.2	36	ikhonikhi
180	30	4.3-5.3	3.2	36	ikhonikhi
180	30	4.3-5.3	3.2	40	ikhonikhi
180	45	4.3-5.3	3.2	40	ikhonikhi
200	45	4.3-5.3	3.2	36	ikhonikhi
200	50	4.3-5.3	3.2	36	ikhonikhi
200	75	4.3-5.3	3.2	40	ikhonikhi
200	45	4.7-5.7	3.2	40	ikhonikhi