Iibhithi zedrill ze-carbide dowel eziqinileyo Iibhithi zedrill ze-monolith Umfanekiso obonisiweyo

Iibhithi ze-carbide dowel drill bits eziqinileyo

Inkcazo emfutshane:

I-dowel drill bit ekhethekileyo yohlobo lwe-carbide eqinileyo ikumgangatho wemizi-mveliso, injongo ephambili yoyilo kukufikelela kubomi obude bokusebenza.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Intshayelelo yeMveliso

Faka intloko yeMicro full carbide, kunye noyilo olwahlukileyo kwincam yokusika, yonyusa uzinzo kunye nobomi bokusebenza, ikakhulu esetyenziswa kwiMDF, kwiChipboard, kumthi oqinileyo, kumthi othambileyo kunye neplywood.

Iimbonakalo

1.Iibhithi zokubhola zekhabhayithi eqinileyo iibhithi zokubhola zemonolith 2.8Ububanzi obuyi-57/70mm ubude
2. I-weld epheleleyo ye-carbide kunye ne-plug-in inokunyusa ubomi bokusebenza kunye nozinzo.
3. I-engile enkulu yokujika inceda ukuphucula ukuphuma kweetshiphusi.
4. Isixhobo se-CNC esisebenza ngezihlanu siqinisekisa ukhuseleko lokusebenza.
5.Inqanaba lobuchwepheshe eligqwesileyo, ingxolo ephantsi, ubomi obude, kunye nozinzo.
6.Sebenzisa koomatshini be-CNC kunye noomatshini bokugrumba

Isicelo

Ububanzi	I-SHANK	UBUDE OBUPHELELEYO	ULAWULO
2	10	57/70	I-RH/LH
2.5	10	57/70	I-RH/LH
3	10	57/70	I-RH/LH
3.5	10	57/70	I-RH/LH
4	10	57/70	I-RH/LH
4.5	10	57/70	I-RH/LH
5	10	57/70	I-RH/LH
5.5	10	57/70	I-RH/LH
6	10	57/70	I-RH/LH
8	10	57/70	I-RH/LH

FAQ

1. Q: Kuthatha ixesha elingakanani ukuhambisa?
A: Ukuba iimveliso zisesitokhweni, zihlala zithatha iintsuku ezi-3-5. Ukuba izinto azikho esitokhweni, kuthatha iintsuku ezili-15-20. Ukuba kukho izikhongozeli ezi-2-3, nceda uqinisekise ngeentengiso.

2. Ngaba niyazibonelela iisampulu? Ngaba zifakiwe okanye azinyanzelekanga?
A: Ewe, singabonelela ngesampulu simahla, kodwa abathengi baya kuba noxanduva lokuhlawula iindleko zokuhambisa.

3. Q: Zithini iimeko zakho zokuhlawula?
A: Intlawulo ilingana ne-1000 USD kwangaphambili. Intlawulo >=1000USD, i-30% T/T kwangaphambili, imbuyekezo ifuneka ngaphambi kokuba ithunyelwe.