TCT vidit ferrum 
PCD Videns Blade 
Frigus vidit 
Drill Bits 
Iter Bits 
Ora Banding Tools 
Alia Instrumenta & Accessories
TCT vidit ferrum
HERO Sizing vidit ferrum
HERO Panel Sizing Saw
HERO Scoring vidit ferrum
HERO Solidum lignum vidit ferrum
HERO Aluminium Saw
Grooving Saw
Videns ferro Profile
Ora Bander Saw
Donec Saw
PCD Videns Blade
PCD Sizing Viderunt Blade
PCD Panel Sizing Saw
PCD Scoring Videns Blade
PCD Grooving Saw
PCD Aluminium Saw
PCD Fibreboard Saw
Frigus vidit
Frigus vidit ferrum ad Ferrous Metal
Arida Cut vidit ferrum ad Ferrous Metal
Frigus vidit Machina
Drill Bits
Dowel EXERCITATIO Bits
Per EXERCITATIO Bits
Hinge EXERCITATIO Bits
TCT Gradus EXERCITATIO Bits
HSS EXERCITATIO Bits / Mortise Bits
Iter Bits
recta Bits
Iam recta Bits
Recta TCT Bits
Recta M16 Bits
Rectus TCT X Bits
45 Degree Chamfer Bit
Carving Bit
Anguli circa Bit
PCD Router Bits
Ora Banding Tools
TCT Fine Trimming Cutter
TCT Rough Trimming Cutter
TCT Pre Milling Cutter
Ora Bander Saw
PCD Fine Trimming Cutter
PCD Rough Trimming Cutter
PCD Pre Milling Cutter
PCD Edge Bander Saw
Alia Instrumenta & Accessories
Drill adaptors
Drill Chucks
Diamond Sand Wheel
Planer cultris-
Featured Product
HERO V6 Viderunt Blade Industrial Viderunt Blade Woodworking Tools
-
Featured Product
PCD Fine Trimming Cutter For Edge Banding Machine Wood Edging
industrialis Sharpe Type Dowel EXERCITATIO Bits lignorum
Product Introduction
Cacumen capitis materialis micro plenam carbidam caput est, et unicum consilium in parte sectionis, stabilitatem et vitam operantem augere, maxime in MDF, Chipboard, durae, lignum et plywood.
Features
1. solidus carbide per frenos terebro monolithorum terebro frenos 57/70mm longitudinis
2. Carbida perfecta et obturaculum in glutino augeat vitam operantem et stabilitatem spondeat.
3. habens ardua tortuosus angulus auget chip evacuationis
4. Solidum carbide V terebra momordit per foramen terebra camum ligni per foramen.
5. Alta stabilitas, alta durabilitas, humilis strepitus, technicae artis excellentia.
6. Usum exercendis machinis et machinis CNC.
Applicationem
| DIAMETROS | CRUS | LONGITUDO SUMMA | DIRECTIO |
| 2 | 10 | 57.5/70 | R/L |
| 2.5 | 10 | 57.5/70 | R/L |
| 3 | 10 | 57.5/70 | R/L |
| 3.5 | 10 | 57.5/70 | R/L |
| 4 | 10 | 57.5/70 | R/L |
| 4.5 | 10 | 57.5/70 | R/L |
| 5 | 10 | 57.5/70 | R/L |
| 5.5 | 10 | 57.5/70 | R/L |
| 6 | 10 | 57.5/70 | R/L |
| 8 | 10 | 57.5/70 | R/L |
FAQ
