TCT Saw Blade
PCD Saw Blade
Cold Saw for Metal
Drill Bits
Router Bits
Edge Banding Tools
Other Tools & Accessories
HERO Sizing Saw Blade
HERO Panel Sizing Saw
HERO Scoring Saw Blade
HERO Solid Wood Saw Blade
HERO Aluminum Saw
Grooving Saw
Steel Profile Saw
Edge Bander Saw
Acrylic Saw
PCD Sizing Saw Blade
PCD Panel Sizing Saw
PCD Scoring Saw Blade
PCD Grooving Saw
PCD Aluminum Saw
PCD Fiberboard Saw
Cold Saw Blade for Ferrous Metal
Dry Cut Saw Blade for Ferrous Metal
Cold Saw Machine
Dowel Drill Bits
Through Drill Bits
Hinge Drill Bits
TCT Step Drill Bits
HSS Drill Bits/ Mortise Bits
Straight Bits
Longer Straight Bits
TCT Straight Bits
M16 Straight Bits
TCT X Straight Bits
45 Degree Chamfer Bit
Carving Bit
Corner Round Bit
PCD Router Bits
TCT Fine Trimming Cutter
TCT Rough Trimming Cutter
TCT Pre Milling Cutter
Edge Bander Saw
PCD Fine Trimming Cutter
PCD Rough Trimming Cutter
PCD Pre Milling Cutter
PCD Edge Bander Saw
Drill Adapters
Drill Chucks
Diamond Sand Wheel
Planer Knives-
Featured Product
PCD Fine Trimming Cutter For Edge Banding Machine Wood Edging
V5 M Series Dry Cutting Cermet tipped Cold Saw Blade for Metal Cutting Machine,Ferrous Metal
TECHNICAL SPECIFICATIONS
| Advantage | Japan imported steel plate body, metal-ceramic alloy serrations, silencing line added.
Applied for cutting cast iron, carton steel,steel rod and pipe, with smoothcutting surface , high efficency and longer cutting life.
|
Commonly used dimensions and service life table
| Cutting Material | Material | Factory test cutting | Speed(RPM) | Material Size | Site life Cut Square（mm） |
| HRB400 | Rebar | 3225 Times | 1000 | 25MM | 1423900 |
| HRB400 | Rebar | 3250 Times | 1000 | 25MM | 1433720 |
| 45# | Round Steel | 435 Times | 700 | 50MM | 765375 |
| Q235 | square steel pipe | 300 Times | 900 | 80*80*7.75MM | 604800 |
| HRB400 | Rebar | 1040 Times | 2100 | 25MM | 510250 |
| Q235 | Steel Sheet | 45 meter | 3500 | 10MM | 450000 |
| Q235 | Steel Sheet | 42 Meter | 3500 | 10MM | 420000 |
| HRB400 | Rebar | 2580 Times | 1000 | 25MM | 1139120 |
| HRB400 | Rebar | 2800 Times | 1000 | 25MM | 1237320 |
| 45# | Round Steel | 320 Times | 700 | 50MM | 628000 |
| Q235 | square steel pipe | 233 Times | 900 | 80*80*7.75MM | 521920 |
| Q235 | Rectangle tubes | 1200 Times | 900 | 60*40*3MM | 676800 |
| HRB400 | Rebar | 300 Times | 2100 | 25MM | 147300 |
| HRB400 | Rebar | 1500 Times | 1000 | 25MM | 662850 |
The composition of the saw blade
Cutting material
Cutting materials: Dry metal cold sawing is suitable for processing low alloy steel, medium and low carbon steel, cast iron, structural steel and other steel parts with a hardness below HRC40, especially modulated steel parts.
For example, round steel, angle steel, angle steel, channel steel, square tube, I-beam, aluminum, stainless steel pipe (when cutting stainless steel pipe, special stainless steel sheet must be replaced)
